China Small Metal Buildings Manufacturers – Multi Storey Steel Structure Building & Hotel &Office & School & Library & Shopping Center High Steel Structure Building – Deshion

Characteristics of multistory structure

1.Great steel ductility, good seismic performance of the structure

2.Light weight, the weight of steel structure tall building is about 60% of the concrete structure, which could greatly reduce the cost of foundation and structure.

3.Short construction period, the construction speed of steel structure is about 1.5 times faster than that of reinforced concrete structure due to its high degree of factorization.

4.Small structure area, steel column area is about 1/3 of the concrete column and save 3% of the building area

5.Lower the storey height, steel beam sections are generally shorter than concrete and the pipeline can pass through the web of the steel beam. The same height allows more floors to be designed to increase the floor area.

Frame structure

1.The frame is composed of columns and beams, bearing vertical and lateral forces

2.The performance of rigid frame against lateral force is poor, the lateral deflection of the structure is large, generally suitable for the structure of below 20 stories

3.The column generally uses box steel column or concrete filled steel tube column

4.The concrete-filled steel tubular column is filled with concrete in the round pipe or box column, which not only has the advantages of steel structure, but also makes full use of the good compressive properties of concrete.

Framed-tube structure

1.This kind of structural system is generally composed of reinforced concrete core tube and outer steel frame.

2.The core tube is a square, rectangular or polygonal cylinder surrounded by more than four reinforced concrete walls, the interior is provided with a certain number of longitudinal and transverse reinforced concrete partitions. When the building is tall, a certain number of steel frames may be set in the core wall;

3.The outer steel frame is made up of steel column and steel beam.

4.The lateral deflection of the building is mainly resisted by the core tube, which is the most commonly used structural system in high-rise buildings

Lateral force resistance of high – rise steel structure – outrigger truss

1.Outrigger truss is an important measure to reduce lateral deflection of high-rise buildings

2.Outrigger trusses are generally located on the equipment floor or refuge floor, the width through the full width of the house, the height is one or two stories high, generally set up three to four floors in the whole floor height

3.The principle of outrigger truss is that when the building is subjected to lateral deflection, the axial tension force of the outer steel column exerts a reverse torque on the outrigger truss so as to reduce the lateral deflection

Floor bearing plate

1.In order to highlight the advantage of fast construction speed of steel structure, floor bearing plate is generally used in high-rise steel structure

2.When using floor bearing plate, scaffolding or form board is not required. Floor bearing plate can be used as permanent form board, which is high speed of construction and can also partially replace the floor reinforcement.

3.Floor bearing plate is usually open, closed, truss types

Floor bearing plate

Closed type floor bearing plate

Free Customized Design

We design complex industrial buildings for clients using AutoCAD, PKPM, MTS, 3D3S, Tarch, Tekla Structures(Xsteel)and etc.

Customization process

Packaging & Shipping

Cladding system

Roof Panel

Roof Panel

Wall Panel

Wall Panel

Wall Panel

Roof Panel

Fiber-Glass

Steel Sheet

Bolt

Galvanized Bolt

Expansion Bolt

Self-Tapping Screw

High Strength Bolt

Anchor bolt

Stud

Main products

Steel Prefab Warehouse

Steel Prefab Hangar

Steel Prefab Stadium

Bailey Bridge

Station

Exhibition Hall

Production Workshop Overview

Iron Workshop

Raw Material Zone 1

Aluminum alloy workshop

Raw Material Zone 2

Robotic welding machine installed in new factory.

Automatic Spraying Area

Multiple cutting machines

Production Process

1.Prepare Material

2.Cutting

3.Joint

4.Automatic Sub-merged Arc welding

5.Straightening

6.Parts Welding

7.Blasting

8.Coating

Quality Control

Ultrasonic weldina inspection

Ultrasonic welding inspection

Spray paint inspection

Ultrasonic weldina inspection

Certification authority

Cooperative company

FAQ

Q: Is your price competitive with other companies?

A: Our business objectives are to give the best price with same quality and best quality with the same price. We can try the best
to cooperate with you to reduce your cost.

Q: How to get the accurate quotation?
A: If you can provide the following project data, we are able to offer you with accurate quotation.
Design code/ design standard
Column position
Maximum wind speed
Seismic load
Maximum snow speed
Maximum rainfall

Q: What the quality assurance you provided and how do you control quality?
A: Established a procedure to check products at all stages of the manufacturing process – raw materials, in process materials,
validated or tested materials, finished goods, etc

Q: What is your service you can offer?
A: Pre-sale service: Consultant service (Answering client’s question)
Primary design plan for free
Assisting client to choose suitable construction plan
Price calculation
Business & technology discussion
Sale Service:
Submission of support reaction data for foundation designing
Submission of construction drawing
Providing requirements for embedding
Construction manual
Fabrication & packing
Statistical table of material
Delivery
Other requirements by clients.